Electrical and Electronics Engineering

Important MCQ questions for GATE, ESE Engineering Service Examination, IES, PSU Examination and Study Material For Electrical and Electronics Engineering in Circuit Theory, Network Theory, Material Science, Power System, Control System, Measurement, Power Electronics, Transformer and Electrical Machine, Control System, EMT, Power Electronics, Microprocessor and Communication System.

Thursday, April 16, 2015

Question Booklet and Answer Key of Assistant Manager (Electrical) 2015 Exam by DMRC

https://drive.google.com/file/d/0BxxYk5UHbphwZE5LQVB5UTd3Snc/view?usp=sharing

https://drive.google.com/file/d/0BxxYk5UHbphwWHNsOFczWEVuOEk/view?usp=sharing
No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

Sunday, April 5, 2015

Empire tape is

(a) varnished cambric
(b) vulcanized rubber
(c) impregnated paper
(d) none of the above



















Ans: a
No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: Power System

The thickness of the layer of insulation on the conductor, in cables, depends upon

(a) reactive power
(b) power factor
(c) voltage
(d) current carrying capacity




Ans: (c) voltage
No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: Important MCQ Question, Power System

Which of the following protects a cable against mechanical injury ?

(a) Bedding
(b) Sheath
(c) Armoring
(d) None of the above

























Ans: c
No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: Power System

Which of the following insulation is used in cables ?

(a) Varnished cambric
(b) Rubber
(c) Paper
(d) Any of the above























Ans: d
No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: Power System

The insulating material for a cable should have

(a) low cost
(b) high dielectric strength
(c) high mechanical strength
(d) all of the above


























Ans: d
No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: Power System
Newer Posts Older Posts Home
Subscribe to: Posts (Atom)

Topics

  • Important MCQ Question
  • PSU Questions
  • Power System
  • RPSC Lecturer Technical Education Department Exam 2014
  • UPSC
  • Electrical Machine
  • PSC
  • IES
  • ESE 2011
  • General Ability Test
  • Power Electronics
  • Circuit Theory
  • DLB AEN 2016
  • RPSC Lecturer Technical Education Department Exam 2011
  • Electrical Measurement and Instrumentation
  • IIFT 2013
  • ESE
  • Engineering Services Examination
  • General Studies
  • Interview
  • IAS Mains
  • EMT
  • Important Days
  • Optional Subject
  • Control System
  • Network Theory
  • ISRO Scientist C SC- 2013
  • Civil Services Mains
  • CUT OFF
  • IES/ESE 2008 Objective Paper 2
  • Question Paper
  • Analog Electronics
  • ESE 2013
  • PSU GATE Cut Off
  • Signal And System
  • Syllabus
  • IES/ESE 2006 Objective Paper 2
  • IES/ESE 2011 Objective Paper 2
  • IES/ESE 2015 Objective Paper 1
  • ISRO Scientist C SC-2014
  • RBI Manager Technical PY 2015
  • Computer
  • Constitution
  • Electrical Interview Questions
  • Essay
  • GATE 2012
  • General Science
  • IES/ESE 2001 Objective Paper 2
  • IES/ESE 2002 Objective Paper 2
  • IES/ESE 2003 Objective Paper 2
  • IES/ESE 2004 Objective Paper 2
  • IES/ESE 2005 Objective Paper 2
  • IES/ESE 2007 Objective Paper 2
  • IES/ESE 2008 Objective Paper 1
  • IES/ESE 2009 Objective Paper 2
  • IES/ESE 2010 Objective Paper 2
  • IES/ESE 2012 Objective Paper 1
  • IES/ESE 2012 Objective Paper 2
  • IES/ESE 2013 Objective Paper 1
  • IES/ESE 2014 Objective Paper 1
  • UPSC-CPF-2007

Popular Posts

  • If VS = VR = 33 KV (three phase) and X = 13 ohm per phase, what will be the maximum power transmission per phase?
  • A 2/1 ratio, two winding transformer is connected as an auto transformer. Its KVA rating as an auto transformer compared to a two-winding transformer is
  • The steady-state stability limit of a synchronous generator can be increased by
  • For a fixed primary voltage how does the secondary terminal voltage of a transformer change if the power factor of capacitive load rises from 0.7 to 0.9 with load current remaining fixed?
  • A 2KVA transformer has iron losses of 150W and full-load copper loss of 250W. The maximum efficiency of the transformer would occur when the total loss is
  • The temperature independent polarization is
  • The electrical stiffness of a synchronous generator connected to a very large grid can be increased by
  • In a self-controlled synchronous motor fed from a variable frequency inverter
  • If the effect of earth is taken into account, then the capacitance of line to ground
  • If the normal frequency is 50 Hz, the setting of the under-frequency relay for the most important load could be

Blog Archive

  • ►  2019 (1)
    • ►  December (1)
  • ►  2017 (3)
    • ►  August (1)
    • ►  July (2)
  • ►  2016 (452)
    • ►  July (3)
    • ►  June (39)
    • ►  May (3)
    • ►  April (307)
    • ►  February (100)
  • ▼  2015 (30)
    • ►  May (11)
    • ▼  April (6)
      • Question Booklet and Answer Key of Assistant Manag...
      • Empire tape is
      • The thickness of the layer of insulation on the co...
      • Which of the following protects a cable against me...
      • Which of the following insulation is used in cables ?
      • The insulating material for a cable should have
    • ►  February (13)
  • ►  2014 (122)
    • ►  September (18)
    • ►  August (25)
    • ►  July (4)
    • ►  June (1)
    • ►  April (2)
    • ►  January (72)
  • ►  2013 (317)
    • ►  December (290)
    • ►  November (27)
Simple theme. Theme images by mammamaart. Powered by Blogger.