Electrical and Electronics Engineering

Important MCQ questions for GATE, ESE Engineering Service Examination, IES, PSU Examination and Study Material For Electrical and Electronics Engineering in Circuit Theory, Network Theory, Material Science, Power System, Control System, Measurement, Power Electronics, Transformer and Electrical Machine, Control System, EMT, Power Electronics, Microprocessor and Communication System.

Saturday, December 7, 2013

ESE 2011 General Ability Paper UPSC



  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC
  • ESE 2011 General Ability Paper UPSC - Q. No. 119 (...
  • ESE 2011 General Ability Paper UPSC - Q. No. 120
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: ESE 2011, General Ability Test, IES, PSC, UPSC

No comments:

Post a Comment

Newer Post Older Post Home
Subscribe to: Post Comments (Atom)

Topics

  • Important MCQ Question
  • PSU Questions
  • Power System
  • RPSC Lecturer Technical Education Department Exam 2014
  • UPSC
  • Electrical Machine
  • PSC
  • IES
  • ESE 2011
  • General Ability Test
  • Power Electronics
  • Circuit Theory
  • DLB AEN 2016
  • RPSC Lecturer Technical Education Department Exam 2011
  • Electrical Measurement and Instrumentation
  • IIFT 2013
  • ESE
  • Engineering Services Examination
  • General Studies
  • Interview
  • IAS Mains
  • EMT
  • Important Days
  • Optional Subject
  • Control System
  • Network Theory
  • ISRO Scientist C SC- 2013
  • Civil Services Mains
  • CUT OFF
  • IES/ESE 2008 Objective Paper 2
  • Question Paper
  • Analog Electronics
  • ESE 2013
  • PSU GATE Cut Off
  • Signal And System
  • Syllabus
  • IES/ESE 2006 Objective Paper 2
  • IES/ESE 2011 Objective Paper 2
  • IES/ESE 2015 Objective Paper 1
  • ISRO Scientist C SC-2014
  • RBI Manager Technical PY 2015
  • Computer
  • Constitution
  • Electrical Interview Questions
  • Essay
  • GATE 2012
  • General Science
  • IES/ESE 2001 Objective Paper 2
  • IES/ESE 2002 Objective Paper 2
  • IES/ESE 2003 Objective Paper 2
  • IES/ESE 2004 Objective Paper 2
  • IES/ESE 2005 Objective Paper 2
  • IES/ESE 2007 Objective Paper 2
  • IES/ESE 2008 Objective Paper 1
  • IES/ESE 2009 Objective Paper 2
  • IES/ESE 2010 Objective Paper 2
  • IES/ESE 2012 Objective Paper 1
  • IES/ESE 2012 Objective Paper 2
  • IES/ESE 2013 Objective Paper 1
  • IES/ESE 2014 Objective Paper 1
  • UPSC-CPF-2007

Popular Posts

  • In a CRT the highest positive potential is given to
  • The electrical stiffness of a synchronous generator connected to a very large grid can be increased by
  • If VS = VR = 33 KV (three phase) and X = 13 ohm per phase, what will be the maximum power transmission per phase?
  • The voltage regulation of a large transformer is mainly influenced by
  • UPSC CIVIL SERVICES EXAMINATION (CSE), CUT OFF 2012, 2013
  • If the fault current is 2000 amps, the relay setting 50% and the C.T. ratio is 400/5, then the plug setting multiplier will be
  • The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is:
  • State the differences in between the P, PI, and PID controller?
  • ESE 2011 General Ability Paper UPSC
  • Important Electrical Engineering Questions for Exam

Blog Archive

  • ►  2019 (1)
    • ►  December (1)
  • ►  2017 (3)
    • ►  August (1)
    • ►  July (2)
  • ►  2016 (452)
    • ►  July (3)
    • ►  June (39)
    • ►  May (3)
    • ►  April (307)
    • ►  February (100)
  • ►  2015 (30)
    • ►  May (11)
    • ►  April (6)
    • ►  February (13)
  • ►  2014 (122)
    • ►  September (18)
    • ►  August (25)
    • ►  July (4)
    • ►  June (1)
    • ►  April (2)
    • ►  January (72)
  • ▼  2013 (317)
    • ▼  December (290)
      • Capacitive Voltage Transformers (CVT)
      • SUB-STATION SPECIFICATION
      • TECHNICAL PARAMETERS OF THE TRANSMISSION SYSTEM
      • Difference between Squirrel Cage Rotor and Wound R...
      • Underground cable construction
      • Impulse Voltage Generator
      • 3 Phase Induction Motor
      • Resistance Color Code
      • Isolator cleaning using distilled water to avoid c...
      • Converting Between Star And Delta
      • Required condition for one alternator to be synchr...
      • In a transformer, hysteresis losses can be reduced
      • The dc motor, which can provide zero speed regulat...
      • A three-phase, three-stack, variable reluctance st...
      • The slip of an induction motor normally does not d...
      • Pintype insulators are used up to
      • Distributed winding and short chording employed in...
      • Tesla coil is used for
      • In a large DC Series motor, why is shunt field win...
      • In a transformer, zero voltage regulation at full ...
      • HVDC Transmission is economical in comparison to 3...
      • A 4 point starter is used to start and control the...
      • The peak value of lightning stroke currents
      • Countries and Parliament
      • Important Web Portals & their Founders
      • World Famous Company Name and Origin/Meaning of Name
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • The materials which exhibit electric polarisation ...
      • if the diameter of the conductor increases what ha...
      • Maxwell's inductance capancitance bridge is used f...
      • Which of the following relay is directional
      • If the positive sequence network terminal volatage...
      • The phenomena of converting mechanical energy into...
      • For a lossless line, the characteristics impedance...
      • The ripple factor of a full-wave rectifier without...
      • A power system is subjected to a fault which makes...
      • In 180ยบ mode conduction of 3-phase inverter feedin...
      • For measurement of frequency, the suitable bridge ...
      • In dc circuit breakers, arc quenching is done by :
      • An emf of 10 V is induced in a coil of inductance ...
      • The most stable sine-wave oscillator is :
      • Resistance switching is normally employed in :
      • A positive clipper circuit always clips :
      • For tuned radio-frequency, the amplifier that can ...
      • Norton theorem deals with the equivalent
      • A 200 V, single-phase input ac voltage controller ...
      • Equal area criteria is applicable for :
      • The surge impedance of a 3-phase 400 kV transmissi...
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
      • Important Electrical Engineering Questions for Exam
    • ►  November (27)
Simple theme. Theme images by mammamaart. Powered by Blogger.